forum.system-cfg.com

Merci!

Bonjour. Here is my collection. (Sorry for link outside of forum!) https://www.facebook.com/retrogamingdenmark/ My collection is dynamic, and I tend to get rid of machines which I don't regularly use. (Example: I no longer own the Atari 600XL.) All machines are restored and maintained in working ord...

You are forgetting the coolest. The one for Acorn BBC Micro: https://www.facebook.com/groups/AcornAn ... 803601456/

I use the Unicard for Sharp MZ-800. It has VGA.

https://www.facebook.com/SharpMZ/posts/1131651766908912

https://www.facebook.com/retrogamingden ... 74/?type=3

https://m.facebook.com/SharpMZ/posts/976756802398410

Thanks to the VERY KIND kweeky, I now own an MO5 datasette! Thank youuuu!

Merci!!!

Kweeky, let me know what you find!

Daniel: thanks,

Regards,
Dakidski

Any model compatible with MO5 will do.
Must be working. Exterior condition not so important.
I prefer cheapest possible shipping to Denmark.

Give me your offers.

Regards,
Dakidski
https://www.facebook.com/retrogamingdenmark

Freshly formatted 4GB FAT-card, 64k clusters. BOOT.SD (renamed from boot_mo.sd) was the first file copied on the disk. I checked all connections (MISO, MOSI and SCK connections) from the tape port and onto the board using a multimeter. I will double check the connection near R18, but I will most lik...

Yes, I'm confident as well!

Will try all your tips instantly. (And no, I didn't rename the file.

Regards.

Dear Daniel, If you inspect my images, do you observe any obvious faults? http://imgur.com/a/zhpTT The machine works fine, but I can't get it to display the "3,5 disk basic" rom. I was thinking of changing the capacitors and trying FAT sd-cards instead of FAT32. Currently I'm using a 32GB ...

Package arrived! Thank you. Will report back when everything is assembled.

Regards,
dakidski

Can you check with a multimeter the connection between GND and the above IC pin 7 ? (IC is a 74LS126, pin 7 is the bottom left pin). Yes, there is connection. And can you check the connection between +5V and the above IC pin 16 ? (the pin with number 16, top right). Yes, there is connection. We nee...

Don't worry, it is no catastrophy. I'd very much like the CS91-280, if you think that would work? I will not be able to do it without pictures with connection points, etc. I can return the parts I don't use from the CS91-282 kit, so others can have use of them. Would you still throw in this interfac...

Dear Daniel, Do I have the right motherboard revision? It doesn't seem look the one in your pictures. Also I can't find the free chip slot, or the jumper selectors. Pictures: http://imgur.com/a/aq9vC Serial on case: 014482 MO5 S D M Serial on motherboard: P0P5001 501994-01 Regards, dakidski, Denmark