Exelvision EXL 100 - how to start with?

C'est la catégorie reine de l'ordinophile, 8 bits et pas un de plus!
Single board ou bus S-100 acceptés.

Modérateurs : Papy.G, fneck, Carl

Avatar de l’utilisateur
TrainingForUtopia
Messages : 141
Inscription : 12 mai 2015 04:44

Exelvision EXL 100 - how to start with?

Message par TrainingForUtopia »

Bought an EXL 100 (it is on the way from france) and my question is ... how to start with that great piece of hardware?

Well, i know, that ExelBasic is available on module, ExelDOS on Disk. The EXL 100 has RAM card slots , a tape port and a port to connect a disk drive. Maybe i should check the tape port pinout to make a cable for mp3 and wav loading (i did that for my Sharps as well).

Thanks in advance.

Tom
Avatar de l’utilisateur
Falkor
Messages : 1701
Inscription : 28 juin 2010 12:09
Localisation : Cluny, Saône et Loire

Re: Exelvision EXL 100 - how to start with?

Message par Falkor »

Hi,

I've got an EXL100 too. Out of order for the moment, but it should be easy to fix the problem. :)

Well you are right, you can use the tape port to load data and games, you can also use the SDLEP reader.

The pinout is here.
Avatar de l’utilisateur
TrainingForUtopia
Messages : 141
Inscription : 12 mai 2015 04:44

Re: Exelvision EXL 100 - how to start with?

Message par TrainingForUtopia »

Thanks for the infos ... i'll have a look ... 8)
Lesarthois
Messages : 203
Inscription : 13 mai 2016 22:21

Re: Exelvision EXL 100 - how to start with?

Message par Lesarthois »

To start BASIC programs, you need the ExelBasic cart. Else, you're restrictd to playing cart software or nothing.
Répondre