Me revoilà avec mes histoires d'alimentation... Parisiennes cette fois-ci... Concernant un dragon 32.
J'ai retrouvé un fil de discussion d'il y a quelques années, traitant ce sujet.
J'ai donc trouvé les tensions de sortie du transformateur (prise db9) :
Code : Tout sélectionner
-----------------------
\ 1 2 3 4 5 / (Looking into the male socket
\ / on the rear of the Dragon)
\ 6 7 8 9 /
\_______________/
1 8.5V AC
2 8.5V AC
3 28V AC
4 0V (centre-tap)
5 28V AC
6 Connected to pin 1 inside PSU plug
7 Connected to pin 2 inside PSU plug
8,9 D64 circuit diagram shows both these connected to pin 4 but these
are not connected inside the plug on two D32 PSUs I've checked.
They are all commoned together on the power regulator PCB.
1,2,6 et 7 : 9,3v
3 et 5 : 31,2v
5 : 0v
Quand je branche le transfo et que j'allume l'ordinateur, rien ne s'affiche à l'écran.
Du coup j'ai testé les tensions redressées en déconnectant le connecteur allant entre la carte d'alimentation et la carte mère, je n'ai aucune tension sur les pin 1,2 et 3 (en continue du coup )
Code : Tout sélectionner
Power Connector
_______________++++_____________________
| |
| Modulator |
| Heatsink |
| ^^^^ |
|______|||||||||_________________________| (Unconventionally, 9 is the
987654321 marked strand. Numbering
______|||||||||_________________________ convention matches the
| ||||||||| | circuit diagrams and PCBs)
| vvv |
| |
| |
Pin Direction Function
9 ^ Composite Video to modulator
8 ^ +5V supply to modulator (linked from pin 2 via main board)
7 ^ Sound to modulator and monitor socket
6 ^ Composite Video to monitor socket
5 Ground
4 Ground
3 v -5V (D32) or -12V (D64)
2 v +5V
1 v +12V
Que pourrais je tester sur cette carte selon vous ?