Test du module Sound Expander pour C64

Placez ici vos trucs et astuces, étalez sans retenue votre savoir-faire et votre science qui va nous permettre de redonner une apparence neuve et fonctionnelle à nos bouzes.

Modérateurs : Papy.G, fneck, Carl

Avatar de l’utilisateur
bobinfo
Messages : 376
Inscription : 17 avr. 2007 07:25
Localisation : Lyon
Contact :

Test du module Sound Expander pour C64

Message par bobinfo »

pour cela... il faut :

1 C64
1 Drive 1541
1 Disquette Sound Expander
1 Module Sound Expander
1 Clavier Type Piano (optionnel) les touches du clavier sont utilisables..
du temps...(n'est ce pas stamba)

Le resultat est pas terrible au niveau son (charly oleg)... ca sonne pas très groovy tout ca...
mais la synthese yamaha permet d'obtenir des percussions sympa avec pour l'époque des sons assez dynamiques.
Je vais approfondir la chose avec d'autres softs beaucoup plus complets.

Quelques images et une vidéo ici > http://www.vcrp.fr/album/commodore/Comm ... V01269.MPG

Image
Image
Image

YoYo !
Avatar de l’utilisateur
Carl
Modérateur
Messages : 13253
Inscription : 08 avr. 2007 13:21
Localisation : http://www.doledujura.fr
Contact :

Message par Carl »

si c'st pour faire de la zik, je te conseil ceci : avec de vrai SID piloté via USB

Image

Image

carl
Avatar de l’utilisateur
bobinfo
Messages : 376
Inscription : 17 avr. 2007 07:25
Localisation : Lyon
Contact :

Message par bobinfo »

en fait j'utilise un yamaha MO6 pour m'eclater le reste du temps.

Je connaissais pas ce type de boitier ? synthèse ? expandeur ?
Avatar de l’utilisateur
Carl
Modérateur
Messages : 13253
Inscription : 08 avr. 2007 13:21
Localisation : http://www.doledujura.fr
Contact :

Message par Carl »

The HardSID 4U is the most powerful SID synthesizer since the legendary C64!

* Two CPUs and main memory
* USB connection (compatible with both 2.0 & 1.1)
* Isochronous USB endpoint for low-latency audio
* VSTi interface with 8000Hz update rate on all SID registers (free)
* Wave-in VSTi pin for routing 8000Hz signals to any registers (example: playing other VSTi's sound on the volume register)
* Full automation of all VSTi parameters
* Superior sound quality (..it is a HardSID!)
* Support for up to four SID chips (6581/8580/6582 in any combination)
* Updateable firmware over USB
* Microsoft Vista compatible (drivers for Win2000/XP/Vista)

..and if you're a C64 fan

* Cycle-accurate playback of your favorite SID tunes
* Digitized sound + high-speed playback with low CPU utilization
* Seamless playback of .sid tunes while you work on your PC by providing a huge playback buffer for non-VSTi applications

The HardSID 4U Studio Edition

* Full physical separation of the SIDs from the USB driven circuits
* 100% elimination of EMI (Electromagnetic interference) noise that may come from your PC via USB

Many PC parts (sometimes the USB controller itself) are generating electromagnetic interference (EMI) which travels through the USB cable into your USB Audio device (HardSID 4U in this case). Even if you use a cable with built-in EMI suppression some of the noise will work its way through to your audio device. So, if any part in your PC isn't properly electromagnetically shielded, the EMI noise will be audible when low level audio is played. EMI noise can not be perfectly removed by any suppression method except by expensive physical separation of circuits connected to the PC from the audio circuits.
Suppressed EMI noise is still perfectly acceptable for hobby usage, but if you're planning to record your work/art in studio quality, you should consider going for the HardSID 4U Studio Edition, since it physically separates your audio circuits from the ones connected to your PC. We're using expensive technologies to replace direct electrical contacts between the PC driven circuits and the audio circuits.

Connectors

* Four mono dry outputs for the best sound quality (2x stereo jacks)
* Mixed output for the easiest usage (1x stereo jack - mono signal)
* Four mono inputs for filtering external sources with SID filters (2x stereo jacks)
* USB connector for connecting the unit to a desktop PC or a Notebook
* DC-in connector for connecting the power supply (1A@12VDC)

forget the emulation... you need the REAL ONE!
Avatar de l’utilisateur
Xorion
Messages : 102
Inscription : 17 mars 2018 10:00

Re: Test du module Sound Expander pour C64

Message par Xorion »

je viens de recevoir un Sound expander avec tout ce qu'il faut (D7, K7, cordon) mais je ne sais pas ou et comment brancher la sortie son sur ma chaine hifi.
il faut un adaptateur ?
Avatar de l’utilisateur
DataPro
Messages : 2790
Inscription : 07 févr. 2011 17:03
Localisation : France - Auvergne

Re: Test du module Sound Expander pour C64

Message par DataPro »

Image
Apparemment, je pense qu'il y a un connecteur RCA/Cinch sur le coté.

Si c'est bien le cas, je ne vois pas la difficulté pour le relier à un ampli :
Image
ou des enceintes amplifiées :
Image
Recherche: cartouches Mattel Intellivision Imagic (loose)
Star Jacker et Lode Runner sur Yeno/SEGA SC-3000
Avatar de l’utilisateur
Xorion
Messages : 102
Inscription : 17 mars 2018 10:00

Re: Test du module Sound Expander pour C64

Message par Xorion »

Ah merci !je comprends mieux. j'ai pas ce cable ! je vais aller m'en chercher un.

dans mon expander y'avait juste celui ci-dessos en image ! à quoi il sert ?

Image

Image
Répondre