C64TPC ou virtualiser un 1541
Modérateurs : Papy.G, fneck, Carl
- Carl
- Modérateur
- Messages : 13288
- Inscription : 08 avr. 2007 13:21
- Localisation : http://www.doledujura.fr
- Contact :
C64TPC ou virtualiser un 1541
Je viens de recevoir mon kit C64TPC qui permet de lire et écrire vers un drive virtualisé (D64) mais aussi de coexister avec un vrai 1541, par exemple true drive en 8 et virtual drive en 9...
le logiciel permet de virtualiser 4 drives...avec une vitesse de chargement > de 40% par rapport à l'original. ne support pas les fastloads...
Frequently Asked Questions
1.Can it run multi-part games?
Yes. This is simple for the C64TPC to do. It is serves image files to the Commodore by request.
2. Can it run multi-disk games?
Yes. Disk swapping is very simple for the 64TPC. You can select the next disk image at runtime. C64TPC supports four virtual drives. If the game allows you to, you can associate every disk images with a different virtual drive, and play without disk swapping.
3. Some games are programmed to use the 1541 disk drive's microprocessor. Can C64TPC run these games?
No. The C64TPC can not emulate the 1541 Disk Drive.
4. Does it support fastloaders?
No. But the C64TPC is already 37% faster than a real 1541 disk drive.
5. Can it run with the 1541 disk drive at the same time?
Yes. Of course, you must be careful of the device number, so they do not conflict with eachother.
6. There is no serial port in my PC. Can I use C64TPC with USB/RS232 convertor?
Yes. you can.
7. Can I load and save my Prophet 64 & MSSIAH songs to/from any folder in my PC with C64TPC?
Yes. you can. C64TPC is full compatible with the MSSIAH & P64 loading and saving system.
Interview with Ahmet Zeki EYMUR
Designer of C64TPC (Connect C64 to PC)
http://www.cancarpet.com/saymantek/c64tpc_en.html
Q. Please introduce yourself to our readers
A. My name is Ahmet Zeki EYMUR. I'm living in
Izmir Turkey. I'm 32 years old.
Q. Can you tell our readers a little about yourself?
A. I am a computer technician. I am interest in both
software and hardware, and I am trying set-up my
own work.
Q. Do you still use Commodore Computers?
A. Yes, I do. I have a Commoore 64 since my
childhood and I also purchased an Amiga 500+ but
have only owned it for a short time.
Q. Please Tell our readers about C64TPC what does
it do?
A. C64TPC connects Commodore 64 to PC via their
serial ports in order that C64 can use PC's storage
devices. C64TPC Project's aim is eliminating 1541
Disk Drive. When you used C64TPC you can load
programs directly from PC. Also you can save
programs directly to PC.
Q. So you are utilising the PC as a Large hard disk
for the Commodore?
A. Yes. This project very different from other
storage alternatives for Commodore 64.
This project's aim is eliminating 1541 Disk Drive.
C64s will be able to stay with us for a long time.
Because, it contains only the electronic parts.
But, there are mechanic parts in 1541 Disk Drives.
If we want to use C64 in future, we must provide
a modern storage alternative to its. C64TPC is my
solution for this problem. It connects C64 to PC,
so that it can support all modern storage devices.
When C64TPC finished it will be low cost and most
effective storage alternative for C64.
Q. Some users get confused with this type of
software, once installed how easy is the software to
use, how much configuration is needed?
A. The software usage is very simple. It have a
graphical user interface for intuitive usage.
The electronic device solves all process for
communication between C64 and PC. Thus, user
does not need to struggle with complex settings or
processes. C64TPC for Windows is ready and
downloadable from project site.
Q. Does this software only work on the Commodore
64 or are other Commodore systems supported?
A. My purpose was Commodore 64. C64TPC may
work with C16, C128 and VIC. Because, C64TPC is
an IEC device. But I didn't test with them yet.
Q. The software runs only on windows or are other
operating systems supported, what version of
windows does the software run on?
A. My target Operating Systems are GNU/Linux,
MacOS X and Windows XP (newer). But I released
only Windows binary yet.
Q. The software permits the usage of D64 images
without extraction, so the Commodore just sees the
files, how is this achieved?
A. Software supports D64 file format. You can select
a target via software. Target can be a D64 file or
PC's file system. When your target was a D64 file,
software mounts to its and your commands (LOAD,
SCRATCH, etc.) applies inside mounted D64 file.
When your target was PC's file system, your
commands applies inside selected folder in PC.
Q. Can the hardware be purchased or would the user
have to design his or her own hardware add-on?
A. I will begin selling when tests finished.
Q. What can the device support can games as well
as say Geos be run via the device?
A. C64TPC can run multi-part and multi-disk games
already. It will be able to run more complex games,
programs after full 1541 Disk Drive emulation.
Q. I notice in the F.A.Q section that fast loaders are
not supported although the software can read disks
faster than a standard 1541, will this support be
added at a later time?
A. Fast loaders will be able to support after 1541
Disk Drive emulation.
Q. What other developments have you planned for
the software I notice on the website full 1541 support
is listed how easy would this be to implement?
A. I have been studying import 1541 Disk Drive
emulation from an open source C64 emulator.
Q. have you seen Nick Copland’s HDD64 would you
say the software compares with this, can the two
coexist for example if our user has HDD64 would he
gain any advantage from running C64TPC
A. I am sorry but I have a small amount of info
about HDD64.
Q. Do you have a schematic for the cable needed to
connect the Commodore and PC together cant just a
x1541 cable or similar be used?
A. No. C64TPC can connect to PC via standard
(RS232) serial cable. IEC cable is already integrated
C64TPC. You needn't any special cable.
le logiciel permet de virtualiser 4 drives...avec une vitesse de chargement > de 40% par rapport à l'original. ne support pas les fastloads...
Frequently Asked Questions
1.Can it run multi-part games?
Yes. This is simple for the C64TPC to do. It is serves image files to the Commodore by request.
2. Can it run multi-disk games?
Yes. Disk swapping is very simple for the 64TPC. You can select the next disk image at runtime. C64TPC supports four virtual drives. If the game allows you to, you can associate every disk images with a different virtual drive, and play without disk swapping.
3. Some games are programmed to use the 1541 disk drive's microprocessor. Can C64TPC run these games?
No. The C64TPC can not emulate the 1541 Disk Drive.
4. Does it support fastloaders?
No. But the C64TPC is already 37% faster than a real 1541 disk drive.
5. Can it run with the 1541 disk drive at the same time?
Yes. Of course, you must be careful of the device number, so they do not conflict with eachother.
6. There is no serial port in my PC. Can I use C64TPC with USB/RS232 convertor?
Yes. you can.
7. Can I load and save my Prophet 64 & MSSIAH songs to/from any folder in my PC with C64TPC?
Yes. you can. C64TPC is full compatible with the MSSIAH & P64 loading and saving system.
Interview with Ahmet Zeki EYMUR
Designer of C64TPC (Connect C64 to PC)
http://www.cancarpet.com/saymantek/c64tpc_en.html
Q. Please introduce yourself to our readers
A. My name is Ahmet Zeki EYMUR. I'm living in
Izmir Turkey. I'm 32 years old.
Q. Can you tell our readers a little about yourself?
A. I am a computer technician. I am interest in both
software and hardware, and I am trying set-up my
own work.
Q. Do you still use Commodore Computers?
A. Yes, I do. I have a Commoore 64 since my
childhood and I also purchased an Amiga 500+ but
have only owned it for a short time.
Q. Please Tell our readers about C64TPC what does
it do?
A. C64TPC connects Commodore 64 to PC via their
serial ports in order that C64 can use PC's storage
devices. C64TPC Project's aim is eliminating 1541
Disk Drive. When you used C64TPC you can load
programs directly from PC. Also you can save
programs directly to PC.
Q. So you are utilising the PC as a Large hard disk
for the Commodore?
A. Yes. This project very different from other
storage alternatives for Commodore 64.
This project's aim is eliminating 1541 Disk Drive.
C64s will be able to stay with us for a long time.
Because, it contains only the electronic parts.
But, there are mechanic parts in 1541 Disk Drives.
If we want to use C64 in future, we must provide
a modern storage alternative to its. C64TPC is my
solution for this problem. It connects C64 to PC,
so that it can support all modern storage devices.
When C64TPC finished it will be low cost and most
effective storage alternative for C64.
Q. Some users get confused with this type of
software, once installed how easy is the software to
use, how much configuration is needed?
A. The software usage is very simple. It have a
graphical user interface for intuitive usage.
The electronic device solves all process for
communication between C64 and PC. Thus, user
does not need to struggle with complex settings or
processes. C64TPC for Windows is ready and
downloadable from project site.
Q. Does this software only work on the Commodore
64 or are other Commodore systems supported?
A. My purpose was Commodore 64. C64TPC may
work with C16, C128 and VIC. Because, C64TPC is
an IEC device. But I didn't test with them yet.
Q. The software runs only on windows or are other
operating systems supported, what version of
windows does the software run on?
A. My target Operating Systems are GNU/Linux,
MacOS X and Windows XP (newer). But I released
only Windows binary yet.
Q. The software permits the usage of D64 images
without extraction, so the Commodore just sees the
files, how is this achieved?
A. Software supports D64 file format. You can select
a target via software. Target can be a D64 file or
PC's file system. When your target was a D64 file,
software mounts to its and your commands (LOAD,
SCRATCH, etc.) applies inside mounted D64 file.
When your target was PC's file system, your
commands applies inside selected folder in PC.
Q. Can the hardware be purchased or would the user
have to design his or her own hardware add-on?
A. I will begin selling when tests finished.
Q. What can the device support can games as well
as say Geos be run via the device?
A. C64TPC can run multi-part and multi-disk games
already. It will be able to run more complex games,
programs after full 1541 Disk Drive emulation.
Q. I notice in the F.A.Q section that fast loaders are
not supported although the software can read disks
faster than a standard 1541, will this support be
added at a later time?
A. Fast loaders will be able to support after 1541
Disk Drive emulation.
Q. What other developments have you planned for
the software I notice on the website full 1541 support
is listed how easy would this be to implement?
A. I have been studying import 1541 Disk Drive
emulation from an open source C64 emulator.
Q. have you seen Nick Copland’s HDD64 would you
say the software compares with this, can the two
coexist for example if our user has HDD64 would he
gain any advantage from running C64TPC
A. I am sorry but I have a small amount of info
about HDD64.
Q. Do you have a schematic for the cable needed to
connect the Commodore and PC together cant just a
x1541 cable or similar be used?
A. No. C64TPC can connect to PC via standard
(RS232) serial cable. IEC cable is already integrated
C64TPC. You needn't any special cable.
Re: C64TPC ou virtualiser un 1541
Salut Carl,
Ca fait au moins un ou deux ans que je possède ce boitier. Mais, j'ai juste fait un ou deux essais avec. Tu me diras ce que tu en penses à l'occasion.
Ca fait au moins un ou deux ans que je possède ce boitier. Mais, j'ai juste fait un ou deux essais avec. Tu me diras ce que tu en penses à l'occasion.
Bruno.
Re: C64TPC ou virtualiser un 1541
moi ça fait bien 1 an que je pense à m'en prendre un.... j'attends ton avis et je fonce ?
Re: C64TPC ou virtualiser un 1541
Ca marche pas de soucis.
Mais Carl est certainement plus testeur que moi
Je l'ai essayé avec mon SX-64, un Vic20 et un C64 à l'époque. Mais depuis, j'ai pas fait beaucoup de chose avec mes Commodore.
Mais Carl est certainement plus testeur que moi
Je l'ai essayé avec mon SX-64, un Vic20 et un C64 à l'époque. Mais depuis, j'ai pas fait beaucoup de chose avec mes Commodore.
Bruno.
- Carl
- Modérateur
- Messages : 13288
- Inscription : 08 avr. 2007 13:21
- Localisation : http://www.doledujura.fr
- Contact :
Re: C64TPC ou virtualiser un 1541
testé avec VIC 20, C64, C16,SX64, C128 en 64 mode, non testé sur Plus4...
JC, il te faudra un PC/Win, le logiciel existe pour Linux et Mac mais n'est pas distribué....
carl
JC, il te faudra un PC/Win, le logiciel existe pour Linux et Mac mais n'est pas distribué....
carl
Re: C64TPC ou virtualiser un 1541
pas de soucis pour le pc
on peut trouver le soft mac où ? (si il est (a été) distribué)
au cas où
on peut trouver le soft mac où ? (si il est (a été) distribué)
au cas où
- Carl
- Modérateur
- Messages : 13288
- Inscription : 08 avr. 2007 13:21
- Localisation : http://www.doledujura.fr
- Contact :
Re: C64TPC ou virtualiser un 1541
il faut ecrire au concepteur :
- Carl
- Modérateur
- Messages : 13288
- Inscription : 08 avr. 2007 13:21
- Localisation : http://www.doledujura.fr
- Contact :
Re: C64TPC ou virtualiser un 1541
Je suis en discussion avec le concepteur pour un soucis technique mais finalement c'est un soucis de compatibilité USB <> COM et pas de son interface, je lui ai demandé si son logiciel est Open source afin d'envisager un portage vers Mac OS, j'attends sa réponse....que voici
Carl
JC, il faudra donc attendre que le code devienne Open source....Sorry, source code is not open for now, maybe later.
I worked on this project before tree years and unfortunatelly, my programming experience was not good.
So I must re-view the source code before open the project.
Carl
- Carl
- Modérateur
- Messages : 13288
- Inscription : 08 avr. 2007 13:21
- Localisation : http://www.doledujura.fr
- Contact :
Re: C64TPC ou virtualiser un 1541
je vais prochainement tester cette configuration...
carl
carl
Re: C64TPC ou virtualiser un 1541
le vicswitch est un nouveau produit ?
- Carl
- Modérateur
- Messages : 13288
- Inscription : 08 avr. 2007 13:21
- Localisation : http://www.doledujura.fr
- Contact :
Re: C64TPC ou virtualiser un 1541
non, c'est un périphérique des années 80 distribué par Handic...compatible IEC (VIC20,C64, C128 mode, 64, +4, C16...)
4 drives et 4 machines
Carl
4 drives et 4 machines
Carl
Re: C64TPC ou virtualiser un 1541
Merci Carl pour l'information
Jamais vu non plus.
JC
Jamais vu non plus.
JC