deballage du sirius victor S1

Pour épater ses petits camarades en présentant sa dernière merdouille ou son super bon plan.

Modérateurs : Papy.G, fneck, Carl

Avatar de l’utilisateur
bobinfo
Messages : 376
Inscription : 17 avr. 2007 07:25
Localisation : Lyon
Contact :

deballage du sirius victor S1

Message par bobinfo »

après plusieurs mois stocké dans un coin je me suis enfin decider a sortir ce S1

Si l'un d'entre vous à une disquette de démarrage... je suis preneur

quelques photos et plus de commentaire comme d'hab sur le site

http://www.vcrp.fr/collection

Image

Image
Avatar de l’utilisateur
fneck
Site Admin
Messages : 17540
Inscription : 01 avr. 2007 12:03
Localisation : Drôme Provençale (26)
Contact :

Message par fneck »

Malheureusement pour la disquette ça ne va pas être facile :(
Fabien https://www.system-cfg.com
Les bonnes pratiques de l'utilisateur du forum viewtopic.php?f=14&t=3
Avatar de l’utilisateur
Carl
Modérateur
Messages : 13300
Inscription : 08 avr. 2007 13:21
Localisation : http://www.doledujura.fr
Contact :

Message par Carl »

A Software Archive for the Sirius/Victor 9000 Microcomputer
Sirius, ACT Sirius 1, S1, Victor 9000, V9000


Operating System Notes

If you have a Sirius with no operating system (boot) disc, by far the easiest way to go will be to find someone with a working Sirius and have him make you a copy. At present I have an archive disc but no means of making a copy, and the disc format is non-standard. However, be assured that there are still working machines owned by Sirius enthusiasts out there!

Enough information is here to boot a Sirius from nothing but it would not be a trivial task. On each boot disc MSDOS.SYS has been archived by PKZIP (on the Sirius the Bios and DOS are combined in MSDOS.SYS, which is normally a hidden system file). However what has not been saved is the (disc) bootstrap to MSDOS.SYS - you would need to run SYS, FORMAT, SYSELECT or SYSGEN to create a bootable disc. Of course you need a booted Sirius to do this! IDRIVER is a device driver for an expansion board we produced which interfaces an external MFM (720K) drive, but we never got round to writing the code to boot off the external drive. It is also possible to boot from the serial port.

An interesting project would be to write a PC program which booted a Sirius via its serial port. Then you could restore the OS, download the rest of the stuff here and Lo! a working Sirius, started from nothing.

LO80.ZIP is for system hackers. LO80 is the 80th and last version of the LOROM i.e. half of the Sirius Boot ROM. (The other half, HI12, containing the floppy, hard disc and serial boot sub-routines, was patched in an EPROM programmer using a partial disassembly as a guide.) LO80.ASM is the source code for the system test, screen display on start-up and the boot itself. The Issue ROMs were based on the Universal ROMs (checksum F3F7), capable of booting all operating systems.

Operating Systems (all Sirius/V9000 unless stated)
UKDOSFL1.ZIP
UKDOSFL2.ZIP
VICKISYS.ZIP
DOS29.ZIP
291OBJS.ZIP
DOS293.ZIP
FLD290D1.ZIP
FLD290D2.ZIP
GERMSDOS.ZIP
FRMSDOS.ZIP
FLD293D1.ZIP
FLD293D2.ZIP
UKDOSHD.ZIP
MSDOS3D1.ZIP
MSDOS3D2.ZIP
LO80.ZIP
Issue version of Floppy MS-DOS 2.93 (233k)
Sub-directory of the above disc - Clock+ utils (9k)
Vicki (Luggable type of Sirius) Operating System (31k)
MS-DOS 2.90 (43k)
Objects for MS-DOS 2.91 (72k)
MS-DOS 2.93 (62k)
Original Floppy MS-DOS 2.90 disc 1 (196k)
Original Floppy MS-DOS 2.90 disc 2 (54k)
German MS-DOS (31k)
French MS-DOS (31k)
Original Floppy MS-DOS 2.93 disc 1 (196k)
Original Floppy MS-DOS 2.93 disc 2 (54k)
Issue version of Hard disc MS-DOS 2.93 (225k)
Original Floppy/Hard disc MS-DOS 3 disc 1 (219k)
Original Floppy/Hard disc MS-DOS 3 disc 2 (245k)
Boot ROM code, see note above (164k)

:arrow: http://www.issue.org.uk/#OS


carl
Avatar de l’utilisateur
fneck
Site Admin
Messages : 17540
Inscription : 01 avr. 2007 12:03
Localisation : Drôme Provençale (26)
Contact :

Message par fneck »

C'est bien ce que je disais, ça ne va pas être facile :?
Fabien https://www.system-cfg.com
Les bonnes pratiques de l'utilisateur du forum viewtopic.php?f=14&t=3
Avatar de l’utilisateur
Carl
Modérateur
Messages : 13300
Inscription : 08 avr. 2007 13:21
Localisation : http://www.doledujura.fr
Contact :

Message par Carl »

jette un oeil ici si le format est supporté...
http://www.shlock.co.uk/Utils/OmniFlop/OmniFlop.htm

carl
Avatar de l’utilisateur
bobinfo
Messages : 376
Inscription : 17 avr. 2007 07:25
Localisation : Lyon
Contact :

Message par bobinfo »

merci carl,

j'avais déjà vu et je les ai déja contacté !

j'ai pas pensé à omniflop.. on sait jamais

mais j'ai un doute.. car le bios doit être sur la disquette...
Avatar de l’utilisateur
bobinfo
Messages : 376
Inscription : 17 avr. 2007 07:25
Localisation : Lyon
Contact :

Message par bobinfo »

pas de nouvelles des gars....

je retente un mail !!
Répondre