[Wanted] TO7-70 Keys - "1" & "2" or a complete keyboard

Requérir ici son Graal à la communauté, attention "oldies only" évidemment, sinon ça va dans le "Passage"
(Attention: concerne uniquement le matériel de collection).

Modérateurs : Papy.G, fneck, Carl

Répondre
Avatar de l’utilisateur
TrainingForUtopia
Messages : 141
Inscription : 12 mai 2015 04:44

[Wanted] TO7-70 Keys - "1" & "2" or a complete keyboard

Message par TrainingForUtopia »

I'm searching for two keys for a TO7-70 ... or a complete Peritel keyboard.

Key "1" and Key "2" ...

Maybe someone has some spare keys or a complete keyboard & would sell them.

Offers with a price including shipping costs to germany, thanks.
Dernière modification par TrainingForUtopia le 13 avr. 2017 13:51, modifié 2 fois.
Avatar de l’utilisateur
fneck
Site Admin
Messages : 17423
Inscription : 01 avr. 2007 12:03
Localisation : Drôme Provençale (26)
Contact :

Re: [WANTED] Two TO7-70 Keys - "1" & "2"

Message par fneck »

What kind of keyboard ?

This one
Image

... or this other
Image
Fabien https://www.system-cfg.com
Les bonnes pratiques de l'utilisateur du forum viewtopic.php?f=14&t=3
Avatar de l’utilisateur
TrainingForUtopia
Messages : 141
Inscription : 12 mai 2015 04:44

Re: [WANTED] Two TO7-70 Keys - "1" & "2"

Message par TrainingForUtopia »

... this one ...

Image

Well ... it seems, that this one is a different keyboard ... "Peritek".
Dernière modification par TrainingForUtopia le 05 juin 2015 20:30, modifié 1 fois.
Fabrice Montupet

Re: [WANTED] Two TO7-70 Keys - "1" & "2"

Message par Fabrice Montupet »

Funny thing on the last picture: The keys top on this mechanical keyboard for the TO7-70 are exactly the same as the ones for the TI-99/4A, same design, same font :)
The rest differs.
Avatar de l’utilisateur
TrainingForUtopia
Messages : 141
Inscription : 12 mai 2015 04:44

Re: [WANTED] Two TO7-70 Keys - "1" & "2"

Message par TrainingForUtopia »

I found this link ...

http://www.old-computers.com/Museum/pho ... eritek.jpg
> PERITEK KEYBOARD

As with the original TO-7 and its poor keyboard, Peritek, a french company, proposed a mechanical keyboard to install on top of the rubber one of the TO-7/70. It had great success until Thomson decided, at last, to release its new TO-7/70 with a native mechanical keyboard...

The picture shows first version of the TO-7/70 with a Peritek keyboard mounted.
Avatar de l’utilisateur
fneck
Site Admin
Messages : 17423
Inscription : 01 avr. 2007 12:03
Localisation : Drôme Provençale (26)
Contact :

Re: [WANTED] Two TO7-70 Keys - "1" & "2"

Message par fneck »

It will be more difficult to find because it is not the original keyboard.
I don't have this keyboard.
Fabien https://www.system-cfg.com
Les bonnes pratiques de l'utilisateur du forum viewtopic.php?f=14&t=3
Avatar de l’utilisateur
TrainingForUtopia
Messages : 141
Inscription : 12 mai 2015 04:44

Re: [WANTED] Two TO7-70 Keys - "1" & "2"

Message par TrainingForUtopia »

Hope dies last ...
__sam__
Messages : 7923
Inscription : 18 sept. 2010 12:08
Localisation : Brest et parfois les Flandres

Re: [WANTED] Two TO7-70 Keys - "1" & "2"

Message par __sam__ »

This might be a case where a 3D printer might be useful.
Samuel.
A500 Vampire V2+ ^8^, A1200 (030@50mhz/fpu/64mb/cf 8go),
A500 GVP530(MMU/FPU) h.s., R-Pi, TO9, TO8D, TO8.Démos
Fabrice Montupet

Re: [WANTED] Two TO7-70 Keys - "1" & "2"

Message par Fabrice Montupet »

... or vampirize a TI-99/4A keyboard (Alps model) :)
Avatar de l’utilisateur
TrainingForUtopia
Messages : 141
Inscription : 12 mai 2015 04:44

Re: [WANTED] Two TO7-70 Keys - "1" & "2"

Message par TrainingForUtopia »

I've some TI99/4a with mechanical keyboards ...

I asked a guy with a 3d printer, if he could make the the keys. I think he'll do it.
Fabrice Montupet

Re: [WANTED] Two TO7-70 Keys - "1" & "2"

Message par Fabrice Montupet »

Using a 3D printer is a high-tech makeshift repair for a poor finish result. Without lot of work, you'll never get a key identical to the orignal.
With a 3D printer, you'll have to make a .stl print file respecting the orginal shape of the key (hard job), to reproduce the exact mid-bright/satin black color and you'll have to wrire/apply the same font for "1" and "2" numbers. Without forget that the keys will have to suport the wear of multiple touches. Suffice to say that this operation will be complicated...

For a good result, I see two ways: find the original keys or vampirize a computer using the same keys, even if it means to change/modify the fixing system of the key.
Avatar de l’utilisateur
TrainingForUtopia
Messages : 141
Inscription : 12 mai 2015 04:44

Re: [WANTED] Two TO7-70 Keys - "1" & "2"

Message par TrainingForUtopia »

Still searching ...
Avatar de l’utilisateur
TrainingForUtopia
Messages : 141
Inscription : 12 mai 2015 04:44

Re: [WANTED] Two TO7-70 Keys - "1" & "2"

Message par TrainingForUtopia »

After 1 1/2 year ... still searching ...
Avatar de l’utilisateur
TrainingForUtopia
Messages : 141
Inscription : 12 mai 2015 04:44

Re: [Wanted] TO7-70 Keys - "1" & "2" or a complete keyboard

Message par TrainingForUtopia »

*up* ...
Répondre