[Wanted] TO7-70 Keys - "1" & "2" or a complete keyboard
Modérateurs : Papy.G, fneck, Carl
- TrainingForUtopia
- Messages : 141
- Inscription : 12 mai 2015 04:44
[Wanted] TO7-70 Keys - "1" & "2" or a complete keyboard
I'm searching for two keys for a TO7-70 ... or a complete Peritel keyboard.
Key "1" and Key "2" ...
Maybe someone has some spare keys or a complete keyboard & would sell them.
Offers with a price including shipping costs to germany, thanks.
Key "1" and Key "2" ...
Maybe someone has some spare keys or a complete keyboard & would sell them.
Offers with a price including shipping costs to germany, thanks.
Dernière modification par TrainingForUtopia le 13 avr. 2017 13:51, modifié 2 fois.
- fneck
- Site Admin
- Messages : 17531
- Inscription : 01 avr. 2007 12:03
- Localisation : Drôme Provençale (26)
- Contact :
Re: [WANTED] Two TO7-70 Keys - "1" & "2"
What kind of keyboard ?
This one
... or this other
This one
... or this other
Fabien https://www.system-cfg.com
Les bonnes pratiques de l'utilisateur du forum viewtopic.php?f=14&t=3
Les bonnes pratiques de l'utilisateur du forum viewtopic.php?f=14&t=3
- TrainingForUtopia
- Messages : 141
- Inscription : 12 mai 2015 04:44
Re: [WANTED] Two TO7-70 Keys - "1" & "2"
... this one ...
Well ... it seems, that this one is a different keyboard ... "Peritek".
Well ... it seems, that this one is a different keyboard ... "Peritek".
Dernière modification par TrainingForUtopia le 05 juin 2015 20:30, modifié 1 fois.
Re: [WANTED] Two TO7-70 Keys - "1" & "2"
Funny thing on the last picture: The keys top on this mechanical keyboard for the TO7-70 are exactly the same as the ones for the TI-99/4A, same design, same font
The rest differs.
The rest differs.
- TrainingForUtopia
- Messages : 141
- Inscription : 12 mai 2015 04:44
Re: [WANTED] Two TO7-70 Keys - "1" & "2"
I found this link ...
http://www.old-computers.com/Museum/pho ... eritek.jpg
http://www.old-computers.com/Museum/pho ... eritek.jpg
> PERITEK KEYBOARD
As with the original TO-7 and its poor keyboard, Peritek, a french company, proposed a mechanical keyboard to install on top of the rubber one of the TO-7/70. It had great success until Thomson decided, at last, to release its new TO-7/70 with a native mechanical keyboard...
The picture shows first version of the TO-7/70 with a Peritek keyboard mounted.
- fneck
- Site Admin
- Messages : 17531
- Inscription : 01 avr. 2007 12:03
- Localisation : Drôme Provençale (26)
- Contact :
Re: [WANTED] Two TO7-70 Keys - "1" & "2"
It will be more difficult to find because it is not the original keyboard.
I don't have this keyboard.
I don't have this keyboard.
Fabien https://www.system-cfg.com
Les bonnes pratiques de l'utilisateur du forum viewtopic.php?f=14&t=3
Les bonnes pratiques de l'utilisateur du forum viewtopic.php?f=14&t=3
- TrainingForUtopia
- Messages : 141
- Inscription : 12 mai 2015 04:44
Re: [WANTED] Two TO7-70 Keys - "1" & "2"
Hope dies last ...
-
- Messages : 7986
- Inscription : 18 sept. 2010 12:08
- Localisation : Brest et parfois les Flandres
Re: [WANTED] Two TO7-70 Keys - "1" & "2"
This might be a case where a 3D printer might be useful.
Samuel.
A500 Vampire V2+ ^8^, A1200 (030@50mhz/fpu/64mb/cf 8go),
A500 GVP530(MMU/FPU) h.s., R-Pi, TO9, TO8D, TO8.Démos
A500 Vampire V2+ ^8^, A1200 (030@50mhz/fpu/64mb/cf 8go),
A500 GVP530(MMU/FPU) h.s., R-Pi, TO9, TO8D, TO8.Démos
Re: [WANTED] Two TO7-70 Keys - "1" & "2"
... or vampirize a TI-99/4A keyboard (Alps model)
- TrainingForUtopia
- Messages : 141
- Inscription : 12 mai 2015 04:44
Re: [WANTED] Two TO7-70 Keys - "1" & "2"
I've some TI99/4a with mechanical keyboards ...
I asked a guy with a 3d printer, if he could make the the keys. I think he'll do it.
I asked a guy with a 3d printer, if he could make the the keys. I think he'll do it.
Re: [WANTED] Two TO7-70 Keys - "1" & "2"
Using a 3D printer is a high-tech makeshift repair for a poor finish result. Without lot of work, you'll never get a key identical to the orignal.
With a 3D printer, you'll have to make a .stl print file respecting the orginal shape of the key (hard job), to reproduce the exact mid-bright/satin black color and you'll have to wrire/apply the same font for "1" and "2" numbers. Without forget that the keys will have to suport the wear of multiple touches. Suffice to say that this operation will be complicated...
For a good result, I see two ways: find the original keys or vampirize a computer using the same keys, even if it means to change/modify the fixing system of the key.
With a 3D printer, you'll have to make a .stl print file respecting the orginal shape of the key (hard job), to reproduce the exact mid-bright/satin black color and you'll have to wrire/apply the same font for "1" and "2" numbers. Without forget that the keys will have to suport the wear of multiple touches. Suffice to say that this operation will be complicated...
For a good result, I see two ways: find the original keys or vampirize a computer using the same keys, even if it means to change/modify the fixing system of the key.
- TrainingForUtopia
- Messages : 141
- Inscription : 12 mai 2015 04:44
Re: [WANTED] Two TO7-70 Keys - "1" & "2"
Still searching ...
- TrainingForUtopia
- Messages : 141
- Inscription : 12 mai 2015 04:44
Re: [WANTED] Two TO7-70 Keys - "1" & "2"
After 1 1/2 year ... still searching ...
- TrainingForUtopia
- Messages : 141
- Inscription : 12 mai 2015 04:44