[vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components
Modérateurs : Papy.G, fneck, Carl
[vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components
Greetings,
I finished a batch of my minimalistic and Low Cost General Purpose Fujinet v1.6
These are called general purpose, due to the interface its not only dedicated to Atari 8 bits computers;
the unit is detachable, a DB15 to SIO, DB15 to DIN6, DB15 to RJ12, DB15 to DB19...
allows you to connect the Fujinet v1.6 to each supported (currently or future) computer such Atari 8 bits - Commodore 64 - Coleco Adam - Apple II
The unit includes all the hardware elements of Fujinet v1.6, also the Coleco Adam interface components.
Via jumpers, you can select the desired operation, if Atari 8 bits SIO (C64 as well) or if you desire Coleco Adam Interface.
As well, the unit can be powered externally, or via the SIO interface. There is a jumper to change this selection.
The USB interface is included, in order to update the device.
ESP32 WROVER with 16 MB flash and 8 MB PSRAM
A photograph:
A video, using the device in an Atari 65XE:
https://www.youtube.com/watch?v=_1_GGwkDpXk
Price of an unit is 60€ (comes with an Atari SIO cable); (original unit price is around 100€ and 80€)
each additional cable such C64 - Coleco Adam takes 9€ per cable
plus 6€ of tracked shipment to Spain, or 9€ for Europe, or 10€ for USA, or 11€ for rest of the world.
--------------------------------------------------------
Edited: Tested Coleco Adam compatibility
Some days ago I tested the Low Cost Fujinet v1.6 multiplatform version I manufactured
in a real Coleco Adam.
Update: A video I recorded operating the device in a Coleco Adam computer:
https://www.youtube.com/watch?v=c0pwmi6F7UQ
These images illustrates the Low Cost Fujinet v1.6 running in a Coleco Adam,
using a DB15 to RJ12
Also, the DB15 to SIO cable is illustrated, due to this Fujinet edition contains
both Coleco Adam and Atari 8 bits interface components at same time.
I finished a batch of my minimalistic and Low Cost General Purpose Fujinet v1.6
These are called general purpose, due to the interface its not only dedicated to Atari 8 bits computers;
the unit is detachable, a DB15 to SIO, DB15 to DIN6, DB15 to RJ12, DB15 to DB19...
allows you to connect the Fujinet v1.6 to each supported (currently or future) computer such Atari 8 bits - Commodore 64 - Coleco Adam - Apple II
The unit includes all the hardware elements of Fujinet v1.6, also the Coleco Adam interface components.
Via jumpers, you can select the desired operation, if Atari 8 bits SIO (C64 as well) or if you desire Coleco Adam Interface.
As well, the unit can be powered externally, or via the SIO interface. There is a jumper to change this selection.
The USB interface is included, in order to update the device.
ESP32 WROVER with 16 MB flash and 8 MB PSRAM
A photograph:
A video, using the device in an Atari 65XE:
https://www.youtube.com/watch?v=_1_GGwkDpXk
Price of an unit is 60€ (comes with an Atari SIO cable); (original unit price is around 100€ and 80€)
each additional cable such C64 - Coleco Adam takes 9€ per cable
plus 6€ of tracked shipment to Spain, or 9€ for Europe, or 10€ for USA, or 11€ for rest of the world.
--------------------------------------------------------
Edited: Tested Coleco Adam compatibility
Some days ago I tested the Low Cost Fujinet v1.6 multiplatform version I manufactured
in a real Coleco Adam.
Update: A video I recorded operating the device in a Coleco Adam computer:
https://www.youtube.com/watch?v=c0pwmi6F7UQ
These images illustrates the Low Cost Fujinet v1.6 running in a Coleco Adam,
using a DB15 to RJ12
Also, the DB15 to SIO cable is illustrated, due to this Fujinet edition contains
both Coleco Adam and Atari 8 bits interface components at same time.
Dernière modification par masteries le 07 juin 2022 21:05, modifié 2 fois.
Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components
Update,
Tested Coleco Adam computer compatibility, see first post edition.
Tested Coleco Adam computer compatibility, see first post edition.
Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components
Update,
A video operating the device in a Coleco Adam computer:
A video operating the device in a Coleco Adam computer:
Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components
Test aujourd'hui du Fujinet en version Adam, et ca fonctionne très bien une fois configuré la carte SD et l'interface :
L'extension Fujinet:
Une fois connecté a l'Adam:
Une photo (trouvé sur le net) de tous les softs existant pour Adam, en K7 évidemment.
Pas beaucoup d'exclusivité Adam hormis Dragon's lair, les autres titres sont des reprises
Coleco cartouches améliorés plus ou moins
Au premier démarrage du Fujinet il faut configurer les divers 'services' (host).
SD pour accèder au softs stockés sur la carte SD
Ensuite les adresses Telenet pour les softs stockés sur divers serveurs.
Connexion sur le serveur Fujinet.online, essentiellement des softs Atari:
Connexion sur Fujinet.driller, avec une section Adam :
Le best of broderbund en version D7 depuis le serveur Fujinet.driller :
Exploration de la carte SD :
le jeu Dragon's Lair en version K7 :
Le SmartBasic (clone de l'Applebasic) en version D7 :
J'ai passé un peu de temps pour regrouper les divers softs Adam et classé sur la carte SD
par support (Disk/TAPE) et type (Games/OS/Tools)
Voila donc à tous ceux qui ont un Adam qui ne lit plus les K7 comme le mien, n'hesitez pas
l'interface Fujinet est un bon investissement et de plus compatible avec les Atari et Apple II (à venir)....
L'extension Fujinet:
Une fois connecté a l'Adam:
Une photo (trouvé sur le net) de tous les softs existant pour Adam, en K7 évidemment.
Pas beaucoup d'exclusivité Adam hormis Dragon's lair, les autres titres sont des reprises
Coleco cartouches améliorés plus ou moins
Au premier démarrage du Fujinet il faut configurer les divers 'services' (host).
SD pour accèder au softs stockés sur la carte SD
Ensuite les adresses Telenet pour les softs stockés sur divers serveurs.
Connexion sur le serveur Fujinet.online, essentiellement des softs Atari:
Connexion sur Fujinet.driller, avec une section Adam :
Le best of broderbund en version D7 depuis le serveur Fujinet.driller :
Exploration de la carte SD :
le jeu Dragon's Lair en version K7 :
Le SmartBasic (clone de l'Applebasic) en version D7 :
J'ai passé un peu de temps pour regrouper les divers softs Adam et classé sur la carte SD
par support (Disk/TAPE) et type (Games/OS/Tools)
Voila donc à tous ceux qui ont un Adam qui ne lit plus les K7 comme le mien, n'hesitez pas
l'interface Fujinet est un bon investissement et de plus compatible avec les Atari et Apple II (à venir)....
Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components
Hi, I'm looking for a low cost Fujinet:
- Coleco Adam ***
- Atari 800XL *
*** big priority to have
* if available
Any available?
Thanks.
- Coleco Adam ***
- Atari 800XL *
*** big priority to have
* if available
Any available?
Thanks.
Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components
Thanks Hlide,
Currently there are 3 manufactured and tested units,
As you know, this Fujinet version is compatible with Atari 8 bits and Coleco Adam at same time
(you only need to flash a different Fujinet firmware, of course).
You have a private message with details,
Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components
@masteries
Payment is done for a Fujinet with Atari 8-bit and Coleco Adam cable. Fujinet mostly for Coleco Adam in my case.
Payment is done for a Fujinet with Atari 8-bit and Coleco Adam cable. Fujinet mostly for Coleco Adam in my case.
Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components
@hlide
Your LC Fujinet with A8 and Coleco Adam cables has been sent,
You have a private message with tracking number and details,
Your LC Fujinet with A8 and Coleco Adam cables has been sent,
You have a private message with tracking number and details,
- tahitibub
- Messages : 93
- Inscription : 18 juin 2022 08:35
- Localisation : Lille, Tahiti et la Côte d'Opale
Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components
@Masteries
Hello,
Testing of the FujiNet card on Apple II seems quite advanced now.
By any chance, would you be able to provide your card with the cable for the Apple IIc?
Regards
Hello,
Testing of the FujiNet card on Apple II seems quite advanced now.
By any chance, would you be able to provide your card with the cable for the Apple IIc?
Regards
Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components
Yes, currently there are official Apple 2 schematic and firmware
As well, I am researching how to add Apple 2 support into my current Revision B design.
A friend give me for some time an Apple 2 and and Apple 2gs for testing purposes,
I will report as soon I have results,
As well, I am researching how to add Apple 2 support into my current Revision B design.
A friend give me for some time an Apple 2 and and Apple 2gs for testing purposes,
I will report as soon I have results,
Dernière modification par masteries le 23 sept. 2022 10:58, modifié 1 fois.
- tahitibub
- Messages : 93
- Inscription : 18 juin 2022 08:35
- Localisation : Lille, Tahiti et la Côte d'Opale
Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components
That's a great news. Thanks !
Re: [vente] Low Cost Fujinet v1.6 - Includes USB and Coleco Adam hardware components
Leraptor06
Your Fujinet for Atari 8 bits has been sent,
Thanks!
Your Fujinet for Atari 8 bits has been sent,
Thanks!
- Leraptor06
- Messages : 686
- Inscription : 15 févr. 2022 10:34
- Localisation : Mandelieu