SDMOTO - little case mod

[TrainingForUtopia]

Well, here's is my first try of a little case mod for the SDMOTO interface. Easy built and it works. No need for fixing the board in the case, 'cause it is automatically fixed. I'll do another one with a different case for the SDMO.

[__sam__]

It looks nice. Great

[Daniel]

Congratulations, your white box looks great with the SDMOTO/THOMSON label !

Below is my last mod with a green power LED and an orange activity LED, and no fixation. It lacks only the label.

sdmoto_mod01.jpg (45.94 Kio) Consulté 3104 fois

sdmoto_mod02.jpg (46.4 Kio) Consulté 3104 fois

This is the box I used : http://www.ebay.fr/itm/5pcs-Waterproof- ... 2183382585

[TrainingForUtopia]

Thanks for your pics ...

How you did the leds exactly ... are there any options to build this one without the resistors?

Maybe i'll only extend the normal blue led to the case. I'll build one in the evening.

[6502man]

@TrainingForUtopia: Ouah, white case is very good idea

[TrainingForUtopia]

Yeah, i think, a white case is more suitable for the Thomsons.

[Daniel]

How you did the leds exactly ...

Here are the schematics for the power led and the activity LEDs. In the next version I'll replace the 'through-hole' resistors with SMDs.

sdmoto-leds.png (5.11 Kio) Consulté 3056 fois

For the MO5, black colour is better than white :

[TrainingForUtopia]

Thanks Daniel ...

Well, i forgot the MO5 ...

White/grey is better for nearly all other Thomsons anyway.

I've cut the front of the pcb, 'cause it was too long. Think, it looks a bit better.

Please show me a pic of the connector side of this MO5 interface.

[Daniel]

This is a picture of the connector :

sdmo_boîtier.jpg (68.9 Kio) Consulté 3047 fois