A500 Mini...

Pour parler de toutes les réalisations récentes qui ne sont pas directement destinées à être utilisées avec une machine (ou une catégorie de machines) précise.

Modérateurs : Papy.G, fneck, Carl

Répondre
Avatar de l’utilisateur
Carl
Modérateur
Messages : 13232
Inscription : 08 avr. 2007 13:21
Localisation : http://www.doledujura.fr
Contact :

A500 Mini...

Message par Carl »

J'ai craqué ;-)
j'ai eu une remise lors d'une vente flash, il me coute 3 à 4 fois moins cher qu'un vrai sur Ebay/LBC... :roll:
Il y a déjà des hacks qui circule... :wink:
Amiga 500 mini.jpg
Amiga 500 mini.jpg (333.6 Kio) Consulté 7607 fois
https://retrogames.biz/

Carl
__sam__
Messages : 7909
Inscription : 18 sept. 2010 12:08
Localisation : Brest et parfois les Flandres

Re: A500 Mini...

Message par __sam__ »

Félicitations! fais nous un retour quand tu l'aura utilisé car quand je regarde ce test, je me pose des questions...
Samuel.
A500 Vampire V2+ ^8^, A1200 (030@50mhz/fpu/64mb/cf 8go),
A500 GVP530(MMU/FPU) h.s., R-Pi, TO9, TO8D, TO8.Démos
Avatar de l’utilisateur
Carl
Modérateur
Messages : 13232
Inscription : 08 avr. 2007 13:21
Localisation : http://www.doledujura.fr
Contact :

Re: A500 Mini...

Message par Carl »

Pour info :
Eric Cubizolle

Je suis heureux d'annoncer que j'ai mis en place une distribution Amiga Inside fonctionnelle pour A500 mini ! 🙂
Nous trouvons ainsi un Workbench 3.1 prêt à l'emploi, entièrement configuré et équipé de son logiciel le plus célèbre (Directory Opus, Deluxe Paint V AGA, Protracker, etc. ).
278571945_1002088100738291_1540389517444199546_n.jpg
278571945_1002088100738291_1540389517444199546_n.jpg (272.16 Kio) Consulté 7593 fois
Carl
Bernouilli92
Messages : 1245
Inscription : 24 déc. 2021 09:46
Localisation : Région parisienne

Re: A500 Mini...

Message par Bernouilli92 »

Pourquoi l'image ne prend pas tout l'écran ? Ou du moins sur toute la hauteur.
Avatar de l’utilisateur
Carl
Modérateur
Messages : 13232
Inscription : 08 avr. 2007 13:21
Localisation : http://www.doledujura.fr
Contact :

Re: A500 Mini...

Message par Carl »

a500-mini.jpg
a500-mini.jpg (68.55 Kio) Consulté 7573 fois
http://amigamuseum.emu-france.info/Fich ... 00mini.htm

Carl
Avatar de l’utilisateur
Carl
Modérateur
Messages : 13232
Inscription : 08 avr. 2007 13:21
Localisation : http://www.doledujura.fr
Contact :

Re: A500 Mini...

Message par Carl »

@Bernouilli92
full.jpg
full.jpg (203.14 Kio) Consulté 7573 fois
Why Is My TV Chopping Off The Edges Of The Image?
THEA500 Mini creates a full 720p HD television picture. Some TVs are not completely 720p capable and may scale or crop the image so that it fits the screen. The result is that the edges of the image may not be displayed.

If you have a TV that is doing this, there are two common fixes:

Disable any scaling the TV is performing by changing the TV settings (preferred)
or

Tell THEA500 Mini to avoid using the screen edges by turning off the setting Use screen edges in Options → Advanced settings → Television settings. This creates a safe margin around the game image so that most non-compliant TVs can display the image completely.
For further information, see the sections “Television settings” and “Troubleshooting” in the User Manual.
__sam__
Messages : 7909
Inscription : 18 sept. 2010 12:08
Localisation : Brest et parfois les Flandres

Re: A500 Mini...

Message par __sam__ »

Je vois un workbench. D'après les tests il doit aller à peut près à la vitesse d'un 1200 pas accéléré + FASTRAM (soit 2x la vitesse d'un 1200 de base avec juste la CHIPRAM). Bref ca n'est pas un amiga "bête de course" (avec 030@50mhz ou mieux), mais ca doit être suffisant pour jouer je suppose. Ca te donne cette impression ?
Samuel.
A500 Vampire V2+ ^8^, A1200 (030@50mhz/fpu/64mb/cf 8go),
A500 GVP530(MMU/FPU) h.s., R-Pi, TO9, TO8D, TO8.Démos
Avatar de l’utilisateur
Carl
Modérateur
Messages : 13232
Inscription : 08 avr. 2007 13:21
Localisation : http://www.doledujura.fr
Contact :

Re: A500 Mini...

Message par Carl »

ça va vite en fonction de ce que tu configures comme machine...
au max 500 fois la vitesse d'un A500 de base...
How fast is the A500 Mini
Now that the A500 mini has been “opened” up by the Amiga community we can confirm the speed works out to about to a whopping 486 (niiiice) times faster than a “stock” 7Mhz Amiga 500. The A500 mini uses Amiberry meaning you can configure the performance of the machine for your needs. The screenshot below shows you the best possible performance. It’s not quite the Pi4 running PiMiga 2.0 but it’s damn good. Certainly fast enough to run any Amiga have you can throw at it.
sysinfo.jpg
sysinfo.jpg (274.38 Kio) Consulté 7564 fois
amigabench.jpg
amigabench.jpg (199.75 Kio) Consulté 7564 fois
Carl
__sam__
Messages : 7909
Inscription : 18 sept. 2010 12:08
Localisation : Brest et parfois les Flandres

Re: A500 Mini...

Message par __sam__ »

Ah oui ca c'est cool pour faire tourner les démos qui ont besoin d'un 060 ou mieux (vampire).
Samuel.
A500 Vampire V2+ ^8^, A1200 (030@50mhz/fpu/64mb/cf 8go),
A500 GVP530(MMU/FPU) h.s., R-Pi, TO9, TO8D, TO8.Démos
Avatar de l’utilisateur
Carl
Modérateur
Messages : 13232
Inscription : 08 avr. 2007 13:21
Localisation : http://www.doledujura.fr
Contact :

Re: A500 Mini...

Message par Carl »

Pour le fun ;-)
Non le carton ne fait pas 4 x 2.5 mètres … :roll:
IMG_3528.jpg
IMG_3528.jpg (103.53 Kio) Consulté 7536 fois
gotcha
Messages : 2750
Inscription : 30 mars 2017 11:39
Localisation : Isère
Contact :

Re: A500 Mini...

Message par gotcha »

Personnellement, je préférerais quand même un A500 'maxi' avec un vrai clavier et un Gotek à la place du lecteur interne.
Ils ont fait une souris très sympa, mais la brancher sur un mini avec un clavier USB standard, bof bof. On est quand même loin de l’expérience originale.
Amstrad CPC et Goupil power :mrgreen:
Bénévole à l'association pour un conservatoire de l’informatique et de la télématique (https://www.aconit.org)
Bernouilli92
Messages : 1245
Inscription : 24 déc. 2021 09:46
Localisation : Région parisienne

Re: A500 Mini...

Message par Bernouilli92 »

J'ai craqué moi aussi; je l'ai eu à 107,79 sur Amazon (promo en ce moment -15% + 2% cashback Boursorama).
Je dois le recevoir demain.
__sam__
Messages : 7909
Inscription : 18 sept. 2010 12:08
Localisation : Brest et parfois les Flandres

Re: A500 Mini...

Message par __sam__ »

Si ca te dis de bricoler ton A500-mini une fois que tu as fait le tour tu peux faire comme Perifractic et le transformer en A1200-maxi avec un clavier fonctionnel:
Samuel.
A500 Vampire V2+ ^8^, A1200 (030@50mhz/fpu/64mb/cf 8go),
A500 GVP530(MMU/FPU) h.s., R-Pi, TO9, TO8D, TO8.Démos
Avatar de l’utilisateur
Sebiohazard
Messages : 425
Inscription : 30 avr. 2019 15:07

Re: A500 Mini...

Message par Sebiohazard »

Carl a écrit : 23 avr. 2022 11:43 Pour info :
Eric Cubizolle

Je suis heureux d'annoncer que j'ai mis en place une distribution Amiga Inside fonctionnelle pour A500 mini ! 🙂
Nous trouvons ainsi un Workbench 3.1 prêt à l'emploi, entièrement configuré et équipé de son logiciel le plus célèbre (Directory Opus, Deluxe Paint V AGA, Protracker, etc. ).
278571945_1002088100738291_1540389517444199546_n.jpg

Carl
Hello tu aurais un lien pour le package avec Workbench ?
gotcha a écrit : 23 avr. 2022 19:19 Personnellement, je préférerais quand même un A500 'maxi' avec un vrai clavier et un Gotek à la place du lecteur interne.
Ils ont fait une souris très sympa, mais la brancher sur un mini avec un clavier USB standard, bof bof. On est quand même loin de l’expérience originale.
Ça va venir si le mini a du succès :) donc faut l'acheter déjà rien que pour l'objet il est trop beau j'ai aussi craqué looooooooool !!!
Image
Avatar de l’utilisateur
adnz
Messages : 212
Inscription : 10 janv. 2010 00:07

Re: A500 Mini...

Message par adnz »

j'ai craqué aussi ! reçu aujourd'hui :D
Répondre