Hi,
This is my first post here and I dont really speak French (sorry about that) but hoping someone can help.
I have a motherboard an risercard from a Bull Micral 45 but I am wondering if the power supply connector is standard AT ?
Or does it use some other pinout for grounds, -/+5V and -/+12V ?
Would love to see if this motherboard still works.
Merci!
Bull Micral 45 power supply connection
Modérateurs : Papy.G, fneck, Carl
-
- Messages : 26
- Inscription : 27 févr. 2021 19:24
- Localisation : Zeeland, Netherlands
- Contact :
- fneck
- Site Admin
- Messages : 17531
- Inscription : 01 avr. 2007 12:03
- Localisation : Drôme Provençale (26)
- Contact :
Re: Bull Micral 45 power supply connection
There is a big topic on the Bull Micral 45 here:
https://forum.system-cfg.com/viewtopic.php?f=3&t=9767
With in particular a view of the connector here:
https://forum.system-cfg.com/viewtopic. ... 98#p148498
And the correspondence here:
https://forum.system-cfg.com/viewtopic. ... 02#p148702
https://forum.system-cfg.com/viewtopic.php?f=3&t=9767
With in particular a view of the connector here:
https://forum.system-cfg.com/viewtopic. ... 98#p148498
And the correspondence here:
https://forum.system-cfg.com/viewtopic. ... 02#p148702
Fabien https://www.system-cfg.com
Les bonnes pratiques de l'utilisateur du forum viewtopic.php?f=14&t=3
Les bonnes pratiques de l'utilisateur du forum viewtopic.php?f=14&t=3
-
- Messages : 26
- Inscription : 27 févr. 2021 19:24
- Localisation : Zeeland, Netherlands
- Contact :
Re: Bull Micral 45 power supply connection
Aaah excellent, precisely what I needed, Merci!