bip bip bip (court) - PPC 640 DD
Modérateurs : Papy.G, fneck, Carl
bip bip bip (court) - PPC 640 DD
quelqu'un connait la signification de ces 3 bips ?
Re: bip bip bip (court) - PPC 640 DD
Je viens d'éplucher le livre mode d'emploi mais il n'y a aucune informations sur les bip au démarrage.
Frodon69
Re: bip bip bip (court) - PPC 640 DD
Je ne connais pas le PCC 640, mais de mémoire 3 bip c'est un problème de RAM
- fneck
- Site Admin
- Messages : 17423
- Inscription : 01 avr. 2007 12:03
- Localisation : Drôme Provençale (26)
- Contact :
Re: bip bip bip (court) - PPC 640 DD
As-tu un message à l'écran qui pourrait concerner une erreur du clavier?
J'ai trouvé ceci dans la documentation :
2.2.13 Keyboard Interface test.
Upon power-up or reset, the keyboard self test is performed by the keyboard controller firmware. The keyboard returns keycode 0AAh to signify the successful completion of its testing. If any key code other than 0AAh is returned the keyboard error message is displayed amd keyboard reset is issued (which reruns the keyboard self test). The Keyboard test is repeated until the keyboard test passes. When test pass is received, the error message is removed from the screen and the test is exited as normal. During the keyboard test a short beep is sounded every five seconds to indicate that the test is in progress.
J'ai trouvé ceci dans la documentation :
2.2.13 Keyboard Interface test.
Upon power-up or reset, the keyboard self test is performed by the keyboard controller firmware. The keyboard returns keycode 0AAh to signify the successful completion of its testing. If any key code other than 0AAh is returned the keyboard error message is displayed amd keyboard reset is issued (which reruns the keyboard self test). The Keyboard test is repeated until the keyboard test passes. When test pass is received, the error message is removed from the screen and the test is exited as normal. During the keyboard test a short beep is sounded every five seconds to indicate that the test is in progress.
Fabien https://www.system-cfg.com
Les bonnes pratiques de l'utilisateur du forum viewtopic.php?f=14&t=3
Les bonnes pratiques de l'utilisateur du forum viewtopic.php?f=14&t=3