Bought an EXL 100 (it is on the way from france) and my question is ... how to start with that great piece of hardware?
Well, i know, that ExelBasic is available on module, ExelDOS on Disk. The EXL 100 has RAM card slots , a tape port and a port to connect a disk drive. Maybe i should check the tape port pinout to make a cable for mp3 and wav loading (i did that for my Sharps as well).
Thanks in advance.
Tom
Exelvision EXL 100 - how to start with?
Modérateurs : Papy.G, fneck, Carl
- TrainingForUtopia
- Messages : 141
- Inscription : 12 mai 2015 04:44
Re: Exelvision EXL 100 - how to start with?
Hi,
I've got an EXL100 too. Out of order for the moment, but it should be easy to fix the problem.
Well you are right, you can use the tape port to load data and games, you can also use the SDLEP reader.
The pinout is here.
I've got an EXL100 too. Out of order for the moment, but it should be easy to fix the problem.
Well you are right, you can use the tape port to load data and games, you can also use the SDLEP reader.
The pinout is here.
- TrainingForUtopia
- Messages : 141
- Inscription : 12 mai 2015 04:44
Re: Exelvision EXL 100 - how to start with?
Thanks for the infos ... i'll have a look ...
-
- Messages : 203
- Inscription : 13 mai 2016 22:21
Re: Exelvision EXL 100 - how to start with?
To start BASIC programs, you need the ExelBasic cart. Else, you're restrictd to playing cart software or nothing.