Hector 2HR+ Joystick Pin Outs

C'est la catégorie reine de l'ordinophile, 8 bits et pas un de plus!
Single board ou bus S-100 acceptés.

Modérateurs : Papy.G, fneck, Carl

StarshipUK
Messages : 22
Inscription : 28 déc. 2013 04:07

Hector 2HR+ Joystick Pin Outs

Message par StarshipUK »

Appologies for posting in English, but my French is not very good.

I own a Hextor 2HR+ but the original joysticks are not very good quality and have broken.

I have tried plugging in a standard wired Commodore 64 joystick but it did not work and I think the pin outs on the joystick may be different.

Does anyone know what the joystick port pin outs on a Hextor 2HR+ are and if it would be possible to but a lead which will convert them to the standard Commodore 64 pin outs?

I am also looking for PC software/program which will convert Hector K7 files to WAV audio files. I can only find software which will convert WAV to K7 which is the opposite of what I am looking for. If anyone can help I would really appreciate your help.
Avatar de l’utilisateur
LeGrapyl
Messages : 1228
Inscription : 15 déc. 2013 23:38
Localisation : 34 mais parfois 71...

Re: Hector 2HR+ Joystick Pin Outs

Message par LeGrapyl »

Hi , I think you should try to contact http://forum.system-cfg.com/memberlist. ... ofile&u=70 and check out his site : http://hectorvictor.free.fr/

By the way, now's a good chance for you to practice your french ! :D
Tom la Riboulle, l'homme qui roule en boule !
Avatar de l’utilisateur
irios
Messages : 3396
Inscription : 04 nov. 2007 19:47
Localisation : Rochefort du Gard (30)
Contact :

Re: Hector 2HR+ Joystick Pin Outs

Message par irios »

Hi StarshipUK,

No problem. There are here some people who understand English and you were right to posted here because i think you have your answer.
At the next. :mrgreen:
http://irioslabs.over-blog.com/

La connaissance ne vaut que si elle est partagée par tout le monde.
I2C
StarshipUK
Messages : 22
Inscription : 28 déc. 2013 04:07

Re: Hector 2HR+ Joystick Pin Outs

Message par StarshipUK »

Merci pour votre aide. J'ai envoyé un message pour lui.

On m'a dit il ya un morceau de logiciel appelé CIN2WAV (Interact?) Qui peuvent également convertir des fichiers K7. J'ai cherché mais je n'ai pas été en mesure de trouver le logiciel n'importe où.
Avatar de l’utilisateur
LeGrapyl
Messages : 1228
Inscription : 15 déc. 2013 23:38
Localisation : 34 mais parfois 71...

Re: Hector 2HR+ Joystick Pin Outs

Message par LeGrapyl »

StarshipUK a écrit :Merci pour votre aide. J'ai envoyé un message pour lui.

On m'a dit il ya un morceau de logiciel appelé CIN2WAV (Interact?) Qui peuvent également convertir des fichiers K7. J'ai cherché mais je n'ai pas été en mesure de trouver le logiciel n'importe où.
Do you mean you're looking for a converter to save from a file back onto a tape or from a tape into a file ?

By the way, good on you for your efforts writing in french ! :D
Tom la Riboulle, l'homme qui roule en boule !
StarshipUK
Messages : 22
Inscription : 28 déc. 2013 04:07

Re: Hector 2HR+ Joystick Pin Outs

Message par StarshipUK »

A file back onto tape. But instead of tape I use a portable music device which has a 16GB SD card and plays WAV files.

I have downloaded K7 files which I would like to convert to WAV files so I can load the games on the real machine.

I have done this with VG5000 K7, Alice K7 and TO5 K7 files to WAV files using the converters at http://dcmoto.free.fr/ and they work and the games load on the real machines. But there is no converter there for the Hector K7 files.
Daniel
Messages : 17316
Inscription : 01 mai 2007 18:30
Localisation : Vaucluse
Contact :

Re: Hector 2HR+ Joystick Pin Outs

Message par Daniel »

I programmed all the k7 to wav converters for the Alice, VG5000, Thomson MO, Thomson TO, EXL100.

Unfortunately, I don't own the Hector, so I cannot test the converter for this system. This is why there is only a wav to k7 converter at http://dchector.free.fr . I can try to make the k7 to wav program if you agree to test it for me.

Another way is Mess casstool.exe http://www.mess.org/mess/howto#mess_tools
I don't know if it is available and can do the conversion, I didn't ever find it with a Google search
https://www.google.fr/#q=mess+casstool.exe&safe=off
Daniel
L'obstacle augmente mon ardeur.
Avatar de l’utilisateur
yo_fr
Messages : 1336
Inscription : 13 août 2009 18:24
Localisation : 78...
Contact :

Re: Hector 2HR+ Joystick Pin Outs

Message par yo_fr »

Hello,
for the joystick the pin out :
Image

(extract from the Hectorien N°1)

for the CINWAV program : he's included with the interact emulator from emucompboy.
You can download it at the bottom of the page :http://www.reocities.com/emucompboy/

An other way : you can use castools (as Daniel said), or more easy : you launch MESS, open a K7 file and when you're loading into MESS the file, record the produced sound :wink:

Have fun with your Hector !


[EDIT] In case of trouble, I've made an VB exe to do this job (in french):
Image

If you want it, please give me (by private message), your @
Daniel
Messages : 17316
Inscription : 01 mai 2007 18:30
Localisation : Vaucluse
Contact :

Re: Hector 2HR+ Joystick Pin Outs

Message par Daniel »

You can also try the utility I made today : dchectork7 2013.12.29 at http://dchector.free.fr (Téléchargement).
Not tested. Use with care, and please report any bug.
dchectork7_20131229.png
dchectork7_20131229.png (12.26 Kio) Consulté 5781 fois
Daniel
L'obstacle augmente mon ardeur.
Avatar de l’utilisateur
yo_fr
Messages : 1336
Inscription : 13 août 2009 18:24
Localisation : 78...
Contact :

Re: Hector 2HR+ Joystick Pin Outs

Message par yo_fr »

=> Daniel, j'ai voulu tester ton utilitaire, mais je ne l'ai pas trouvé (Chrome, cache vidé).
JJ
Daniel
Messages : 17316
Inscription : 01 mai 2007 18:30
Localisation : Vaucluse
Contact :

Re: Hector 2HR+ Joystick Pin Outs

Message par Daniel »

Exact, il y a eu un problème de mise à jour du site, merci de l'avoir signalé. Je viens de recommencer, ça doit être bon maintenant...
Daniel
L'obstacle augmente mon ardeur.
StarshipUK
Messages : 22
Inscription : 28 déc. 2013 04:07

Re: Hector 2HR+ Joystick Pin Outs

Message par StarshipUK »

Merci. Je vais tester plus tard et vous laisser savoir si cela a fonctionné.

Y at-il une liste des jeux qui ont besoin du potentiomètre pour pouvoir les jouer?
Avatar de l’utilisateur
yo_fr
Messages : 1336
Inscription : 13 août 2009 18:24
Localisation : 78...
Contact :

Re: Hector 2HR+ Joystick Pin Outs

Message par yo_fr »

With the potentiometre, As far as I know, there's only the 'mur de brique' game.
You'll find it in the Yves site :
Image

http://hectorvictor.free.fr/index.php?p ... 2HU&sft=27
(Image taken from Yves site too)
Avatar de l’utilisateur
yo_fr
Messages : 1336
Inscription : 13 août 2009 18:24
Localisation : 78...
Contact :

Re: Hector 2HR+ Joystick Pin Outs

Message par yo_fr »

Il me semble que ta conversion en WAV ne fonctionne pas : je pense que tu n'as pas mis en place les bits de synchro entre les blocs (4/8 synchro par bloc, beaucoup plus en cas de bloc FE de remplissage). J'avais le même symptôme avant que l'analyse des commandes dans la rom d'Hector m'indiquait que je devais attendre la fin d'exécution des commande de remplissage (les blocs de type FE = demande le remplissage d'une zone avec un octet (c'est grâce à cela qu'en début d'affichage d'une page de présentation lors du chargement d'une cassette on a l'effacement d'écran ou encore les barres rouge et blanche au début de certaines cassettes comme B3X). Pour permettre ce remplissage réalisé par le Z80, il faut que les données issues de la cassette, qui elle ne s'arrête pas, ne soient pas intéressant et ensuite on contrôle au moins 4 cycles de synchro (il me semble).

J'ai essayé sur mon Hector et sur MESS. Le symptôme est le même : effacement de l'écran en tout début de chargement et reboot...

PS : Ce n'est pas un pb de phase, lorsque l'on inverse la phase plus rien ne se produit :wink:
Daniel
Messages : 17316
Inscription : 01 mai 2007 18:30
Localisation : Vaucluse
Contact :

Re: Hector 2HR+ Joystick Pin Outs

Message par Daniel »

Pour les signaux de synchronisation, j'ai pris modèle sur le fichier .wav de Formule 1.
- En début de cassette il y a environ 6000 signaux de synchronisation.
- Entre chaque bloc du programme, il y a 4 signaux de synchronisation.

Mais, effectivement, j'ai remarqué dans la cassette originale quelques blocs (très peu) séparés par un plus grand nombre de synchros. C'est certainement là le problème, car pour simplifier je n'ai mis que 4 synchros partout.

Comment reconnait-on le type de bloc ? Quels types nécessitent une synchro plus longue, et comment la calcule-t-on ?
Daniel
L'obstacle augmente mon ardeur.
Répondre